White magnetic whiteboard, self-adhesive, foam adhesive even for uneven walls, writable, 100 × 60 cm

Self-adhesive magnetic board, magnetic notice board made of metallized foil, size 100 × 60 cm for writing on with whiteboard markers, whiteboards. Office magnets, magnetic figures, and magnets adhere well to it.

The front side is glossy white for easy writing with whiteboard markers and subsequent erasing. The core of the board is a metal foil, the back is self-adhesive with foam adhesive and a protective film. This allows you to stick the magnetic board even on a slightly uneven wall.

The magnetic board is suitable for the office, shop, study, classroom, or as a magnetic notice board for children in their room.

Written or drawn entries can be easily wiped away with a felt eraser, leaving a clear surface for further creativity. Whiteboard markers are suitable for writing on it.

For attaching notes, we recommend smaller neodymium magnets with a load capacity of 1 to 4 kg, magnetic figures or office magnets, as older ferrite (black) types of magnets may be too weak for this purpose.

Newer types of fridge magnets containing a neodymium (metallic silver) magnet, or magnets made of magnetic foil, which you can create from the photo magnet kit, are also suitable for attaching to the metallized foil.

Magnetic board installation steps:

• Have a pencil, tape measure, cloth, felt eraser, or rubber roller for smoothing, and a helper handy.

• The wall or other surface must be clean and free of dust.

• Measure the desired position of the board with a tape measure and mark it on the wall with a pencil.

• Unroll the magnetic board and foil onto a clean table or floor, turn it over and carefully remove the protective foil from the back to a length of about 10 cm.

• Apply the adhesive layer to the wall according to the pencil marks.

• Then smooth the foil and then slowly remove the protective layer from under the foil and gradually stick it to the wall and smooth it.

• After sticking the entire foil, smooth it thoroughly once again with a cloth or felt spatula. In order for the foil to stick well to the wall, pressure when gluing is important.

Tip: If you need to attach weaker (black) ferrite magnets or souvenirs and fridge magnets with a weak ferrite magnet to the wall, you can use a standard galvanized steel sheet.

The metallized foil is 1 mm thick, you can adjust it to the required size, cut it with scissors. In addition to the wall, it can also be glued to the side of a cabinet or door.

Colored magnetic foils and magnetic tapesalso adhere well to the metallized foil, which can also be cut with scissors or a folding knife.

Metallized foils and magnetic boards are also suitable as a base for magnetic building kits Connetix, Magna-Tiles, Magformers and others. You can also create figures and shapes on a vertical surface on the wall.

Try: Magnetic board: Create on it with the Connetix, Magformers building kit

Create your magnetic board directly on the wall, stick it on in moments.

Might be useful:

• Magnetic vs. metal, coated foil – Which is better for magnets?

• Thirteen ideas for colorful magnetic foils in business and at home

• Magnetic tangram – assemble shapes from colored foils