White magnetic whiteboard, self-adhesive, dry-erase, 120 × 90 cm, for flat walls

Self-adhesive magnetic board, magnetic notice board made of metallized foil, size 120 × 90 cm for writing on with whiteboard markers, whiteboards. Office magnets, magnetic figures, and magnets adhere well to it.

The front side is glossy white for easy writing with whiteboard markers and subsequent erasing. The core of the board is a metal foil, the back side is self-adhesive with a protective film. You can stick the magnetic board onto a flat wall, cabinet, door, or other surface.

The magnetic board is suitable for offices, shops, studies, classrooms, or as a magnetic notice board for children in a playroom or club room.

Written and drawn entries can be simply wiped away with a felt eraser, and a clean surface is available again for further creation. Whiteboard markers are suitable for writing on it.

For attaching notes, we recommend smaller neodymium magnets with a load capacity of 1 to 4 kg, magnetic figures or office magnets, as older ferrite (black) types of magnets may be too weak for this purpose.

Newer types of fridge magnets that contain a neodymium (metallic silver) magnet, or magnets made of magnetic foil, which you can create from the photo magnet kit, are also suitable for attaching to the metallized foil.

Magnetic board installation steps:

• Have a pencil, tape measure, cloth, felt eraser, or rubber roller for smoothing, and a helper handy.

• The wall or other surface must be clean and free of dust.

• Measure the placement of the board using a tape measure and mark the wall with a regular pencil.

• Unroll the magnetic board and foil onto a clean table or floor, turn it over and carefully remove the protective foil from the back to a length of about 10 cm.

• Apply the adhesive layer to the wall according to the pencil marks.

• Then smooth the foil and then slowly remove the protective layer from under the foil and gradually stick it to the wall and smooth it.

• After finishing the application of the entire foil, smooth it out once more thoroughly with a cloth or felt applicator. For the foil to adhere well to the wall, pressure during application is important.

Tip: If you need to place weaker (black) ferrite magnets or fridge magnets with a weak ferrite magnet on the wall, you can use a standard steel sheet with a galvanized surface.

The coated foil is 0.5 mm thick; you can adjust it to the required size by cutting it with scissors. In addition to the wall, it can also be glued to the side of a cabinet or door.

Colored magnetic foils and magnetic tapesalso adhere well to the metallized foil, which can also be cut with scissors or a folding knife.

Create a magnetic board directly on the wall; apply it in moments.

Might be useful:

• Magnetic vs. metal, coated foil – Which is better for magnets?

• Thirteen ideas for colorful magnetic foils in business and at home

• Magnetic tangram – assemble shapes from colored foils