Neodymium magnetic pot cylinder Ø 25 h. 35 mm, stud, strength 19 kg

How to easily and precisely integrate a magnetic element into construction without screwing? The cylindrical neodymium holder with a diameter of 25 mm and a smooth pin has a pull-off force of 19 kg*. Thanks to its robust design and a height of 35 mm, it provides exceptional stability in mounting holes.

The steel housing of the holder protects the neodymium magnet from cracking during impacts and simultaneously directs the magnetic field so that its energy is concentrated on the bottom holding working surface. This ensures a multiply higher force than a standard magnet of the same dimensions without a housing.

Smooth pin for quick mounting by pressing, gluing, or simply inserting into a prepared hole, where it can also serve as a guiding or centering element.

The height of the holder body is 35 mm, the height of the smooth pin is 10 mm, the diameter of the pin is 8 mm, and the total height is 45 mm

Advantages of magnetic mounts with a pin

• High holding force 19 kg* can hold even more massive parts, machine components, or structural elements.
• High durability in housing: The robust steel housing protects the brittle neodymium from chipping, even when attaching forcefully to a steel substrate.
• Fast positioning and stability: A height of 35 mm and the absence of a thread allow insertion into a hole without the risk of the holder tilting under lateral pressure.
• High-quality surface finish: The holder is nickel-plated, ensuring its long-term durability and shiny appearance in workshop and industrial conditions.

Magnetic holders are suitable:

In heavy industry and mechanical engineering as positioning pins in clamping fixtures or as magnetic stops and buffers on production lines for heavier components.

For furniture and carpentry when creating strong hidden joints in massive structures, where the pin fits into a milled hole and the magnetic surface ensures firm fixation.

In the workshop and in the production of special tools for constructing magnetic bases with good stability and firm integration into the machine body or table without screwing.

For the construction of modular displays for easily disassembled but strong joints with precise alignment of large and heavy parts.

*The stated pull-off force of 19 kg was measured with a perpendicular pull-off from an ideal surface – a strong steel plate. If you place the magnet on a vertical surface where it is subjected to shear load (sliding), the actual load capacity decreases to 15–25% of the stated value depending on the surface type.

Harness the power of neodymium holders for your technical solutions.