Neodymium magnetic pot cylinder Ø 16 h. 20 mm, M4 threaded stud, 9 kg force

Cylindrical neodymium mount with a diameter of 16 mm and an M4 threaded stud has a high pull-off force of 9 kg*, placing it among the medium-strength magnetic mounts in this category.

The steel housing, in which the strong neodymium magnet is encapsulated, protects the magnet from impacts and concentrates the magnetic energy onto the working surface of the mount. This enhances the holding effect compared to a standard magnet without a housing.

The integrated M4 threaded stud allows for quick installation – simply screw the mount into a nut, profile, or pre-drilled threaded hole to create a stable and strong magnetic point.

The height of the holder body is 20 mm, the height of the threaded stud is 10 mm, and the total height is 30 mm

Advantages of magnetic holders with threaded studs

• High holding force: With a pull-off force of 9 kg*, this mount can secure even heavier metal components, advertising structures, or other elements.
• Maximum mechanical protection: The steel housing protects the fragile neodymium magnet from cracking upon contact with a steel surface, extending its functionality.
• Simple installation: The M4 threaded stud allows for direct and stable mounting without the need for additional fasteners.
• High-Quality Surface Finish: The mount is protected by a nickel layer (Ni-Cu-Ni), which gives it a professional metallic look and provides basic protection against corrosion, yet it is intended for indoor use.

Magnetic holders are suitable:

In Industry and Automation for secure installation of camera systems, heavier sensors, lighting, or control elements directly onto machine structures.

In the Production of Retail Shelving and POS Displays, where you need a firm and stable connection with the steel structure that can be dismantled if necessary.

In the Workshop and Garage for building professional holders for heavy tools, such as hammers or large wrenches. On the M4 stud, eyes, hooks, or clamps can be attached.

In Interiors and Scenography for fixing heavy decorative elements, removable panels, or temporary installations on metal support profiles.

*The stated pull-off force of 9 kg was measured with a perpendicular pull-off from an ideal surface – a strong steel plate. If you place the magnet on a vertical surface where it is subjected to shear load (slipping), we recommend calculating with a real load capacity in the range of 15–25% of the original value.

Utilize the power of neodymium mounts with a threaded stud.