Neodymium magnetic mount cylinder Ø 10 h. 20 mm, stud, strength 2.4 kg

Do you need a magnetic element that you can fasten by simply inserting it into a hole or that serves as a guide pin? The 10 mm diameter cylindrical holder with a smooth pin is the solution for quick mounting with a force of 2.4 kg*.

The steel housing of the holder protects the neodymium core from cracking during impacts and also shields the magnetic field so that its force is concentrated on the bottom front surface.

Thanks to the smooth pin, the magnet is suitable for use where you don't need a threaded connection, but rather precise positioning or the ability to easily slide the holder out of its counterpart at any time.

The holder body height is 20 mm, the smooth pin height is 8 mm, the pin diameter is 4 mm, and the total height is 28 mm

Advantages of magnetic mounts with a pin

• Quick positioning: The smooth pin allows for quick insertion into the prepared hole. It serves as a magnetic guide pin or centering element.
• Concentrated force: Thanks to the steel housing construction, the mount achieves a higher holding force on a steel surface than a magnet of the same size.
• Mechanical protection: The steel casing extends the magnet's functionality, preventing direct impacts on the brittle neodymium material from the side.
• Durable surface finish: The mount is nickel-plated to ensure an aesthetic appearance and basic protection. It is intended for indoor use.

Magnetic holders are suitable:

In industrial production and mechanical engineering as positioning pins in clamping fixtures or for temporary fixing of parts during assembly processes.

For furniture manufacturing and design to create hidden joints, where the pin fits into a milled hole and the magnetic surface ensures a firm closure or fixing of a removable panel.

In the workshop and for model making when producing custom tools and aids where you need a magnetic surface that can be firmly seated in the tool body without screwing.

In the production of advertising stands for easily disassembled joints, where precise alignment of two parts is required.

*The stated pull-off force of 2.4 kg was measured with a perpendicular pull-off from an ideal surface – a strong steel plate. If you place the magnet on a vertical surface where it is subjected to shear load, its actual load capacity drops to 15-25% of the stated value.

Take advantage of practical magnetic holders with a pin for efficient assembly.