Neodymium magnetic cylinder mount, magnetic lens Ø 13 h. 20 mm, strength 6 kg

Do you need to integrate a strong magnet into your construction or product that won't protrude? The smooth cylindrical neodymium magnet with a diameter of 13 mm and a height of 20 mm has a pull force of 6 kg*. It is designed for direct mounting into prepared holes, where it will blend in with the surface.

Thanks to the steel housing, the magnetic element is protected against impacts and mechanical damage. The magnetic lens design ensures that the magnetic force is concentrated on the bottom surface, increasing the holding efficiency compared to standard magnets.

This magnetic mount is suitable for applications where you need a clean design without visible screws or threads. Simply insert, press, or secure the mount into the material (wood, plastic, aluminium) with adhesive.

Advantages of magnetic holders

• High holding force: Despite its compact dimensions, the mount achieves a pull force of 6 kg* for securing even slightly heavier objects.
• Protective steel housing: Protects the fragile neodymium magnet from cracking upon contact with a steel counterpart.
• Surface finish: The mount is protected by a nickel layer for increased durability indoors.
• Easy Integration: Smooth side walls allow for recessing into the material so that the working surface is flush with the surrounding surface.

Magnetic holders are suitable:

In Furniture and Carpentry: magnetic lenses with a force of 6 kg serve as strong invisible stops for doors or as anchoring points for removable cladding and panels.

For Industrial Production: used for fixing components in assembly jigs or as magnetic stops in places where a smooth surface without threads is needed.

In the Workshop and Garage: you can use them to create your own magnetic tool holders that you recess into a wooden strip or plastic organizer.

In Exhibition and Design: for creating detachable connections of exhibition elements that must be strong but visually unobtrusive by fasteners.

*The stated holding force of 6 kg was measured during perpendicular pull-off from an ideal surface – a strong steel plate. If you place the magnet on a vertical surface where shear load acts, the actual load capacity may drop to approx. 15–25% of the original value depending on the roughness and type of surface.

Utilize strong magnetic mounts for clean and secure connections.