MAGIKO Y2-M - magnetic water softener
Do you have hard water, is limescale destroying your appliances? The Magiko Y2-M magnetic water softener, after quick installation on the supply pipe, uses strong neodymium magnets to reduce limescale buildup. Try them out.
Calcium and magnesium salts build up in appliances
The main cause of limescale is particularly hard calcium CaCO3 and magnesium salts, which deposit inside appliances. This is most noticeable in appliances with heating elements, such as electric kettles, coffee makers, dishwashers, washing machines, and electric water heaters. However, delicate mechanisms in faucets can also become clogged.
A thick layer of limescale reduces appliance efficiency, increases electricity consumption, and can damage them. It mainly occurs when using hard water, which is common in many households.
Install a water softener in your home in minutes
You can get the magnetic water softener operational in no time. Simply install it on the cold water supply pipe to your apartment or house, preferably right after the water meter. It is designed for installation on plastic or other water pipes with a water temperature of max. 80 °C.
Magnetic water softeners work without a power supply and contain strong permanent magnets. Additionally, the water softener works without salt, which needs to be added to some devices.
Caution, the magnetic water softener cannot be installed on steel pipes or other ferromagnetic materials.
The composition of the water softener is simple – it consists of two opposing strong neodymium magnets that attract each other through the water pipe. For external mounting on the pipe, 4 Allen screws and a key are included for tightening.
The Magiko Y2-M central water softener is designed for simple installation without the need to disconnect the water pipes. Compact dimensions of 108 × 72 mm and a low weight of only 1 kg allow easy placement on any plastic supply pipe with a diameter from 15 to 60 mm.
Thanks to N45 magnetization, the Magiko Y2-M water softener for apartments generates a strong magnetic induction on the surface of 12800 Gs (1280 mT).
Installation does not require disassembling and reconnecting the water pipes, which is usually necessary for a flow-through water softener.
How does a magnetic water softener work?
Strong magnets acting through the water pipe influence the flowing water inside. From a physical point of view, the water still has the same parameters. The content of mineral salts, as well as its measurable hardness and conductivity, remains the same. The effect of a strong magnetic field causes a change in the crystalline structure of the minerals contained in the water.
After water softening in the household, these then have a tendency to deposit less in appliances. This treated water can even gradually dissolve existing deposits.
To date, there is no study available regarding the effects of long-term consumption of water treated by a magnetic softener; however, the mineral content and chemical composition of the water remain the same.
Parameters of the MAGIKO Y2-M magnetic water softener
-
Dimensions 108 × 72 mm
-
Weight 1 kg
-
Magnetization N45
-
Magnetic induction on the surface 12800 Gs (1280 mT)
-
Maximum operating temperature 80 °C
-
For pipe diameter 15–60 mm
-
Includes 4 mounting screws and a wrench
-
Quick pipe installation, maintenance-free
-
Works permanently, without electricity
-
Reduces limescale buildup, saves appliances and electricity
120 days to try the water softener
The effectiveness of water treatment and the degree of reduction in limescale deposits are influenced by various factors, such as the specific water composition, the condition and type of water pipes, water flow rate, its temperature, and other parameters. Therefore, the effect can vary in different locations.
For this reason, we offer the option to return the magnetic water softener within an extended period of 120 days and receive a full refund for the softener.
Try a modern way to reduce limescale formation without risk and protect your appliances.
Review
This product currently has no text reviews.
Information on how to get reviewsMagnetic water softener for pipes Magiko Y2-M up to a pipe diameter of 60 mm, 108 × 72 mm, weight 1 kg, strong N45 magnetization, max. operating temperature 80 °C, magnetic induction 12800 Gs (1280 mT), 120 days to try.
Parameters
| Dimensions | 108 x 72 mm |
| Weight | 1 kg |
| Magnetisation | N45 |
| Max. working temperature | 80 ° C |
Do you need advice on choosing?
Or do you need a larger quantity of magnets than is in stock?
Contact us. We will help you choose.

































































































