Black magnetic board, self-adhesive, foam adhesive even for uneven walls, writable, 100 × 60 cm

Self-adhesive magnetic board, a magnetic notice board made of metallized foil, size 100 × 60 cm for writing with chalk and chalk markers on blackboards. Office magnets, magnetic figures, and magnets adhere well to it.

The front is matte black for easy writing with chalk and chalk markers, and subsequent erasing. The core of the board is a metal foil, the back is self-adhesive with foam adhesive and a protective film. This allows you to stick the magnetic board even on a slightly uneven wall.

The magnetic board is suitable for offices, shops, studies, classrooms, or as a magnetic notice board for children in a playroom or club room.

Written or drawn content can be simply wiped away with a sponge, leaving a clean surface for further creativity. White and colored dustless chalks or chalk markers, pens for dark boards are suitable for writing.

For attaching notes, we recommend smaller neodymium magnets with a load capacity of 1 to 4 kg, magnetic figures or office magnets, as older ferrite (black) types of magnets may be too weak for this purpose.

Newer types of fridge magnets containing a neodymium (metallic silver) magnet, or magnets made of magnetic foil, which you can create from the photo magnet kit, are also suitable for attaching to the metallized foil.

Magnetic board installation steps:

• Have a pencil, tape measure, cloth, felt eraser, or rubber roller for smoothing, and a helper handy.

• The wall or other surface must be clean and free of dust.

• Measure the desired position of the board with a tape measure and mark it on the wall with a pencil.

• Unroll the magnetic board and foil onto a clean table or floor, turn it over and carefully remove the protective foil from the back to a length of about 10 cm.

• Apply the adhesive layer to the wall according to the pencil marks.

• Then smooth the foil and then slowly remove the protective layer from under the foil and gradually stick it to the wall and smooth it.

• After sticking the entire foil, smooth it thoroughly once again with a cloth or felt spatula. In order for the foil to stick well to the wall, pressure when gluing is important.

Tip: If you need to place weaker (black) ferrite magnets on the wall or souvenirs and fridge magnets with a ferrite magnet with a lower magnetic force, you can use a regular steel sheet with a galvanized surface.

The metallized foil is 1 mm thick, you can adjust it to the required size, cut it with scissors. In addition to the wall, it can also be glued to the side of a cabinet or door.

Colored magnetic foils and magnetic tapesalso adhere well to the metallized foil, which can also be cut with scissors or a folding knife.

Metallized foils and magnetic boards are also suitable as a base for magnetic building kits Connetix, Magna-Tiles, Magformers and others. You can also create figures and shapes on a vertical surface on the wall.

Try: Magnetic board: Create on it with the Connetix, Magformers building kit

Create a black magnetic board directly on the wall, stick it on in a moment.

Might be useful:

• Magnetic vs. metal, coated foil – Which is better for magnets?

• Thirteen ideas for colorful magnetic foils in business and at home

• Magnetic tangram – assemble shapes from colored foils