3M™ 468MP Sticker, double-sided adhesive, thin Ø 8 mm

Smaller circular stickers with a diameter of 8 mm made from premium 3M™ 468MP transfer adhesive layer are designed for applications where every millimeter counts. As they do not contain any carrier film, the bond is formed solely by a clear film of high-performance adhesive that is virtually invisible. We supply in packs of 10 pcs, the price is for 1 pc.

• Ideal for small magnets: A diameter of 8 mm precisely matches small neodymium discs.
• Strong Bond: Thanks to the thin adhesive layer, the magnet remains in close contact with the substrate.
• Industrial Quality 200MP: Resistant to aging, moisture, and chemicals.
• High Temperature Stability: Short-term resistance up to +200 °C, also suitable for electronics.
• Precise Application: The circular cut facilitates handling and ensures a clean appearance without adhesive overflow.

Scope of use: Fixing small neodymium magnets in model making, fine mechanics, for gift packaging, jewelry, or small electronic devices.

Instructions for use:

1. The surfaces to be bonded, the magnet, and the substrate, must be completely clean and degreased; use isopropyl alcohol, for example.
2. Apply the sticker to the magnet and press firmly for a few seconds, perhaps using a flat tool.
3. Carefully remove the backing paper, place the magnet in position, and press firmly again.
4. The bond reaches its maximum strength after 72 hours.
5. The strength of the bond depends on surface preparation and applied pressure.

What makes 3M™ 468MP stand out for 8 mm diameter magnets? With small magnets, the adhesive area is very limited, so the adhesive must be extremely effective. 3M™ 468MP is characterized by high shear strength, so even such a small magnet will not shift on a smooth surface. Additionally, the adhesive layer is clear and does not yellow over time, which you will appreciate for more aesthetically demanding projects and design accessories.

Glue easily and firmly.