3M™ 468MP Sticker, double-sided adhesive, thin Ø 18 mm

Circular stickers made from premium 3M™ 468MP adhesive layer (200MP type acrylic adhesive). This is a "transfer" tape without a carrier layer, meaning the bond is formed solely by a clean adhesive film. This ensures minimal bond thickness and top-tier stability.

• Minimal Thickness: The bond barely increases the magnet's height, making it ideal for precise alignment.
• Extreme Temperature Resistance: Briefly withstands temperatures up to +200 °C.
• Excellent Shear Strength: Prevents the magnet from sliding on the surface even under high load.
• Chemical Resistance: Excellently resists solvents, moisture, and aging.
• Clean Result: The adhesive does not yellow and remains clear.

Scope of Use: Fixing neodymium magnets to smooth metal surfaces, plastics (excluding PE/PP), glass, and wood. Ideal for industrial applications, labels, and graphic panels.

Instructions for use:

1. Surfaces must be smooth, dry, and thoroughly degreased, for example with technical alcohol.
2. Apply the sticker to the magnet and activate it with strong pressure.
3. Remove the protective liner, press the magnet onto the surface, and apply strong pressure again – sufficient pressure activates the adhesive layer.
4. The joint reaches maximum strength after 72 hours.
5. The strength of the bond depends on surface preparation and applied pressure.

What makes 3M™ 468MP stand out for magnets? While foam tapes (VHB) fill unevenness, the 3M™ 468MP sticker is for cases where you need the magnet to literally "sit" directly on the surface. Thanks to high shear strength, the magnet will not move even under repeated lateral stress. It is the industrial standard for applications requiring long durability and resistance to high temperatures.

Glue easily and firmly.